English 
English 
Spanish 
German 
French (France) 
Italian 
Dutch 
Swedish 
Turkish 
Polish 
Romanian 
French (Belgium) 
Norwegian 
Norwegian 
German (Austria) 
Danish 
Finnish 
Czech 
Portuguese 
Welcome back to our comprehensive guide on the ZOYI ZT-703S! In this installment, we’ll dive into some essential oscilloscope functions: Run Mode, Backlight Brightness, and Baseline Calibration. These features are crucial for optimizing your measurement experience and ensuring accurate results. Let’s explore each of these functions in detail.
Run Mode: Normal vs. High-Speed
The ZT-703S oscilloscope offers two distinct operating modes: Normal Mode and High-Speed Mode. These modes allow you to tailor the device’s performance based on the frequency of the signal you’re measuring.
-
Normal Mode:
- This mode is ideal for signals with frequencies below 30MHz. It offers a maximum sampling rate of 200MSa/s and a measurement bandwidth of 30MHz. Normal Mode is more power-efficient, making it suitable for extended use when high-speed sampling isn’t required.
-
High-Speed Mode:
- For signals with frequencies above 30MHz, switch to High-Speed Mode. This mode boosts the sampling rate to 280MSa/s and extends the measurement bandwidth to 50MHz. While it consumes more power, it ensures accurate capture and analysis of high-frequency signals.
To switch between modes, navigate to the fourth menu and press F3. Choose the mode that best suits your measurement needs.
Backlight Brightness: Adjust for Optimal Visibility
The ZT-703S features a 3.5-inch IPS full-view color display, which is bright and clear in most lighting conditions. However, you can adjust the backlight brightness to suit your environment and conserve battery life.
To adjust the brightness:
- Enter the fourth menu and press F2.
- Choose from four brightness levels: 30%, 50%, 80%, or 100%.
For indoor use, a brightness setting of 30% is usually sufficient. However, if you’re working in a brightly lit environment, you may want to increase the brightness for better visibility.
Baseline Calibration: Ensuring Accurate Measurements
Over time, environmental factors such as temperature changes or prolonged periods of non-use can cause the oscilloscope’s baseline to drift. The ZT-703S includes a Baseline Calibration feature to correct this issue and ensure accurate measurements.
To perform a baseline calibration:
- Enter the third menu and press F1.
2. The screen will prompt you to unplug the probe and press the MENU key to start calibration.
3. Follow the on-screen instructions to complete the process.
Important Notes:
- Do not connect any probes or input signals during calibration, as this may cause calibration errors or damage the instrument.
- Ensure the device is in a stable environment before starting the calibration process.
Conclusion
The ZOYI ZT-703S is packed with features designed to enhance your measurement experience. By understanding and utilizing the Run Mode, Backlight Brightness, and Baseline Calibration functions, you can ensure optimal performance and accuracy in a variety of measurement scenarios.
Stay tuned for the next part of our guide, where we’ll explore more advanced features of the ZT-703S. If you missed our previous posts, check out our Comprehensive Guide to ZOYI ZT-703S (Part 1): Display Symbols and Operating Modes to catch up!
